It’s FREEZING, literally!

Okay, yes the temperature outside is on its way down to 36 degrees before sunrise tomorrow, but that’s not the kind of freezing we’re talking about here.

We are getting really close to leaving Florida and there are still a few minor projects that need to be finished up. One of the MANY boat projects that have been keeping us busy over the last few months was to install another refrigeration unit in the empty space next to the refrigerator we already have. The space was used as a freezer many moons ago but someone took it out. OBVIOUSLY they weren’t catching any 100 pound tuna like we will be soon ;)

Our existing refrigerator is an Adler/Barbour Dometic air-cooled CU-100 ColdMachine. It consists of a large vertical evaporator and an air-cooled condenser unit. The dial can be set from 1 to 7 and we only need to leave it at 3 1/2 in order to keep the inside of the evaporator at freezing temps. This is perfect for keeping the rest of the insulated box a nice cool temp resembling what a normal household refrigerator would be.

We like it so much that we opted to install the same unit in soon-to-be freezer compartment. This way, we can either set the dial for normal refrigeration and freezer space, or we can just crank the dial to freeze the whole thing and use it as one big freezer if when Peter catches all that fish. This isn’t his first luau… the man sure does know how to hook ’em!

Before the new unit could be installed we had to remove the plexiglass shelf and the aluminum rails that were inside the space. It was a puzzle to get those suckers out of there but we finally figured out that they had to be unscrewed and then pivoted out.

IMG_3513

It got cleaned out really well. Peter did this project all by himself, and I kept busy with the camera ;)

Next, he marked up the rigid insulation foam we bought from Home Depot. It came in monster size sheets, or you can buy cute little 2×2 squares of the purple stuff. We got two of the squares. A bread knife worked well enough to slice through the foam.

IMG_3523

IMG_3518

Piece by piece the odd-shaped walls of our freezer compartment started coming to life. It wasn’t too critical to get an exactly flush cut, but he got it close enough.

IMG_3524

We also bought a roll of Self-Stick Foam/Foil Duct Insulation to apply over the rigid foam. We thought the Great Stuff was a great idea, but didn’t end up using it for this project after all.

IMG_3525

The walls of the space were already insulated and fiberglassed in but we wanted to just add a little bit more insurance so we don’t end up with an unnecessary loss of cold air.

IMG_3527

IMG_3539

A chunk of purple stuff was attached to the lid and a layer of the foil wrap was pressed on top too.

IMG_3531

The lid needed a new seal. Again with the Duck brand… I swear it’s just a coincidence. This stuff really stays put though. No sponsorship or affiliation, we just really like it :)

IMG_3533

IMG_3535

IMG_3541

Here comes the ‘cool’ part!! haha

We decided to limit the DIY part of this project to just the insulation. We hired a professional marine refrigeration guy to handle the install of the actual condenser unit and evaporator. So we’ve been told, refrigeration is nothing to mess around with if you don’t know what you’re doing.

The parts cost much less through a distributor: $1200 (compared to $1800 retail)

We paid about $800 in labor so the whole project cost $2000.

This is only $200 more than it would have cost us to do the whole thing ourselves and having it done right is totally worth 200 bucks. It was done way faster than we could have done it, and we know all the wiring and refrigerant is installed safely too.

DSC_0001

The condenser unit was installed in the engine room which was directly behind where the refrigerator and freezer are in the galley.

DSC_0002

This may be the first picture I’ve posted of our engine room but how frickin awesome is this?? There is so much room in here! If you look closely you can see a nice empty spot on the wall on the right where the condenser unit is going to be installed. The refrigerant lines have been run through.

DSC_0009

Back on the other side… the evaporator box was mounted along with all the other components that go inside the freezer.

DSC_0012

DSC_0014

DSC_0092

DSC_0093

DSC_0101

DSC_0103

DSC_0108

My favorite part of this whole deal?? I get THREE, yes THREE new aluminum Adler/Barbour vertical ice-cube trays!! These suckers are something like $80 a piece brand new!! They make awesome monster size ice cubes and last a long time. Every morning we soak one tray upside down inside a 52oz bubba keg filled 3/4 of the way with water. When the ice is melted a little, it will slide right out. We top off the rest with water and it lasts practically all day even in 90 degree weather.

If you’re interested in other options for ice-cubes on a boat, check out my friend Carolyn’s recent post on The Boat Galley. Search her site to see a ton of other amazing tips and ideas for making life so much easier in the galley. If you weren’t as lucky as I was to score these awesome vertical trays, be sure to check out all the other ideas Carolyn has for making ice on a boat.

DSC_0120

DSC_0122

The finished product: a dedicated freezer for all of Peter’s fish… and other provisioning of course :)

DSC_0131

7 comments

  1. Rebecca says:

    Great on the fridge but….you have NO IDEA how jealous I am of your engine room! Our engines are underneath the bunks in our aft cabins, and not only is it a supreme pain in the a** to move mattresses to do our daily engine checks! you have to be a contortionist to get to any part other than the very top of the engine block.

  2. Paul Lucier says:

    Had the same unit in our Pearson 35. Two things I did differently: the evaporator was placed against the back of the box and I placed a piece of 2 in. blue foam, glassed each side, across the box the box. This partition had a 3 in. hole, 3 inchs from the bottom, through it with a damper on one side. This piece didn’t go all the way to the lid, maybe 1/2 in. from it on top. This is a ‘spill over’ setup and it made to aft end of the box a freezer. In our three winters in George Town, Exuma we never bought ice and always had cubes, lots of cubes. When I built the system I also made two lids, great help. The front section was a great ‘frig’ with room for plenty of food stuffs and almost a case of beer/soda, great cold sink.
    Paul
    Formally of SV/ Perfect Partner.

      • Paul Lucier says:

        A partition is easy, can be pit in in two pieces. Don’t forget to close the damper after the frig side has chilled down, like after you replace some beer, soda or whatever. The freezer was truely a freezer. On one trip south my wife picked up a small roast that I put in the bottom. We forgot all about it until the trip north in the spring, 5 months later. Frozen rock solid. It’s important keep the frez side as full as possible, zip lock bags with ice cubes works well.
        And I know somebody is asking about the power needs. We had 4 gulf cart batteries, a 110 amp. Balmar alt. with smart reg. and two 75 watt solar panels. While at anchor in the Exumas the only time I ran the engine was to move across the harbor or if we had several cloudy days in a row.
        I should add that the box had at least 4 inchs of insulation on the sides and bottom with 3 on top.
        Good luck.

Leave a Reply to SV Mary Christine Cancel reply